strtspdlx
ArboristSite Guru
I've had this thing for awhile. Never ran right. And it ate the fuel lines up. So I replaced them and put in a carb kit. Now if I try to start it it won't. I do it exactly as the instructions say and nothing. Here's the fun part. If I pull either the fuel supply or primer line off the carb it'll start and run for a second or two. Then nothing. I have to prime it again and remove the lines (either of them) and it'll do it all again. I'm 100% positive the carb kit is correctly installed and I am getting fuel to the diaphragm if I prime it and move metering lever by hand. I am not getting fuel in the primer line or the build. I feel like I have a bad one way valve in the primer block on the carb. It's a zama w19 71a
Regards-Carlo
Regards-Carlo