CS-2511T 1/4" pitch bar

[blizake7]

Hey guys,

I've been using a 1/4" pitch .043 gauge Panther bar on my CS-2511T saw and loved it. But unfortunately Panther is out of stock and has been for months. Does anyone know of another bar with the same pitch and gauge that would fit on that saw? I've looked and can't seem to find any. I'd prefer 16" or 14". 12" is just a bit too small.
Thanks!

 

[Sierra_rider]

Hey guys,

I've been using a 1/4" pitch .043 gauge Panther bar on my CS-2511T saw and loved it. But unfortunately Panther is out of stock and has been for months. Does anyone know of another bar with the same pitch and gauge that would fit on that saw? I've looked and can't seem to find any. I'd prefer 16" or 14". 12" is just a bit too small.
Thanks!

Sorry, not 1/4 pitch, but I run the Woodlandpro narrow-kerf bar+chain on my 2511t. It's a little less drag/narrower than the standard 3/8lp chain and comes in up 16" length. I run the 16" on my 2511 and it has no issue pulling it. The chain is semi-chisel, but is a non-safety chain.

https://www.baileysonline.com/woodl...max-lite-chainsaw-bar-chain-combinations.html

 

[wagneral]

Sorry, not 1/4 pitch, but I run the Woodlandpro narrow-kerf bar+chain on my 2511t. It's a little less drag/narrower than the standard 3/8lp chain and comes in up 16" length. I run the 16" on my 2511 and it has no issue pulling it. The chain is semi-chisel, but is a non-safety chain.

https://www.baileysonline.com/woodl...max-lite-chainsaw-bar-chain-combinations.html

Which mount did you order - the UM? Do you know if this would work? It looks like the same bar but with options already selected.

https://www.baileysonline.com/woodlandpro-16-arbormax-lite-bar-chain-combo-34lp-56-drive-links.html
Thanks!

 

[Sierra_rider]

Which mount did you order - the UM? Do you know if this would work? It looks like the same bar but with options already selected.

https://www.baileysonline.com/woodlandpro-16-arbormax-lite-bar-chain-combo-34lp-56-drive-links.html
Thanks!

I ordered the UM...I don't know why they don't have the 2511t on their fitment guide, but it works with zero modification. The Echo mount uses a 56dl chain in the 16".

 

[giver]

Doesn't stihl make a .043 gauge 1/4 bar for their pole saws

 

[industrialsized]

Doesn't stihl make a .043 gauge 1/4 bar for their pole saws

yes the "Rollomatic Mini" line of bars are all 1/4 .043 they are available in 10" 12" 14" 16" and decent little bars for the price not sure how they fit on the 2511 but can check tomorrow night while I'm in the shop.

 

[industrialsized]

Cannon's toonie tip carving bars are available in .043 and would be a decent choice for you although they are solid nose (nonroller)

your other option would be 3/8lp in .043 gauge. Tsumura has a good selection of options and current availability but you would have to switch you clutch drum back to stock.

 

[SplitItNow]

Archer makes .043 1/4 pitch bars in universal mount, not sure of all sozes, but I just bought a 10" on evil bay for $20. I saw they had a 12" as well...