Dolmar 143 crank seals

[Rooster1956]

Hi everyone
New to the forum
Looking for crank seals for a Dolmar 143.
Can someone steer me in the right direction to where I can find them?
Is there any seals compatible from other saws?
Thanks in advance

 

[av8or3]

The best way to get your seals is to find the size you need . It’s often molded into the seal itself. Looks like 20x16x6. It’s a metric seal the numbers you find will be in millimeters. You can also make your own measurements with a good dial caliper.
Dolmar website has the parts diagram for your saw . You can find the actual part numbers there and search for them that way too. And you can appeal to the general public in the “Parts” wanted section of the classifieds.
That’s all I got.

 

[Rooster1956]

Than you for your reply.
I found the part #’s 926 900 051,
And 926 900 054. But have not had luck finding them. Hopefully I will get another reply. Again thank you

 

[Modifiedmark]

I done seals in a 133 Super a few years back and they were standard metric seals, but I didn't write the numbers down back then.

Luckily the Dolmar IPL's show the seal part number and the actual seal sizes, so I looked them up for ya.

The FW side seal is 17x28x6, the clutch side is 17x30x7.

 

[Rooster1956]

That’s great. Thank you
Where would I acquire said seals? I’m in northern Mexico.

 

[av8or3]

Search eBay for 17x28x6 oil seal and it’ll come up for you. Same with/ the other size.

 

[Rooster1956]

Thank you. I’ll give it a shot.

 

[oldpartsinasia-joe]

oldpartsinasia - old stocks but new.
Location: Singapore
DOLMAR 962 900 054 RADAL RING 17/28X6
DOLMAR 962 900 051 RADIAL RING 17/30X7

Joe