Dolmar 6400 tune

[Jetterbug]

Howdy all! First post . So I bought this guy 3 years ago and was wondering what routine maintenance is needed/required. Any muffler inspection? Replace spark plug? Fuel filter? Thanks

 

[Jetterbug]

Whatcha think?

 

[Jetterbug]

Found a new chain as well

 

[pro94lt]

If it ain't broke don't fix it but in my opinion pulling the limiter caps are a must on the 7300-7900 my 7900 was way to lean from the factory

 

[makguy]

Routine stuff would be the normal...air filter, fuel filter and spark plug, sprocket, etc.
Also, cleaning the screen on the muffler, changing clutch springs when they wear out.

 

[watsonr]

and checking the tune often

 

[Jetterbug]

Thanks guys for all the help. As far as chain goes, what you firewood burnin, hardwood splittin, back achin at the end o the day lumberjacks use? I purchased a spare Oregon 72LGX ..sound right? Thx

 

[z71mike]

LGX is fine chain.

Like Randy already said, and I'll back up, the only routine maintenance you need is frequent tuning. All the time.

 

[Jetterbug]

Anyone know the difference between LPX? I guess that is all the dealer by me has.

 

[z71mike]

Go on the Oregon website and look at the differences. I don't remember off hand, so that's what I'd do.

 

[Flint Mitch]

Found a new chain as well

Kinda late...

But that chain is on backwards.



Sent from my SM-G892A using Tapatalk

 

[Deleted member 149229]

Go to the Oregon site.

 

[Tree Feller]

Lpx and lgx have the same cutters. The LPX has an extra bumper link in the chain. Makes boring a little easier. I actually like the LPX a little better. The LPX is a little smoother. Both good chains.

 

[Tree Feller]

Also I’ve had my 6400 for 5-6 years. Never done anything but blow out the filter and check the tune. Still running the same plug! Damn fine saws!