Echo CS590 600 600 p

[mountainlake]

Am I the only one that managed to strip out the carb mounting screws that screw into plastic, shame on Echo and any other saw that doesn't have a metal insert for the carb screws. Mine has metal inserts now on both sides. On the stripped side the screw pushed though easy, I pushed it through, put a nut on it and heated it up and pulled it into the plastic almost the dept. of the nut where it stays put real nice, on the good side I had to drill it out a little to get the screw to slide through the hole. Now I have a saw that I can tighten the screws up properly. I did the same thing an a Husky Rancher a few years ago. Steve