Echo custom felling dogs

[Butch(OH)]

The 750 Echo had a rinky dink felling dog untill fellow fourm member and Echo nut Bob Wright made me a custom H-D clutch cover so I could add a clutch side spike. I added a set of Stihl 66 felling dogs. I thougt it came out nice and yes I know they are on upside down, the bottom spike will be shortened if need be. The picture does no justice to Bob's work believe me.

<IMG SRC=http://www.tractorshed.com/gallery/pieces/v3610.jpg>

 

[TwoTurboVolvos]

Very nice work! Looks factory.
Ron

 

[Bob Wright]

Thanks Butch the spikes look great, glad i could help...Bob

 

[lovetheoutdoors]

Looks great....

 

[Justsaws]

Looks good. Remember you can hold the saw upside down just should not hold it backwards. I was amazed at the tiny spikes on my 750's. Good saws, look better with adult sized spikes. Good job to both of you.

 

[Butch(OH)]

Looks good. Remember you can hold the saw upside down just should not hold it backwards. I was amazed at the tiny spikes on my 750's. Good saws, look better with adult sized spikes. Good job to both of you.

Im right up the road in 'vernon

 

[Cut4fun]

Butch, if you are talking Mt. Vernon or live near Pacemakers raceway. You are about 1 1/2 hour drive from woodjunkies gtg's. Just shoot straight up Rt.13. I live at the halfway mark between both locations.

 

[Butch(OH)]

Pacemakers? whats that?:hmm3grin2orange: If I stand up and look out the window Id be looking right down the track.

 

[sawn_penn]

Looks good. Remember you can hold the saw upside down just should not hold it backwards. I was amazed at the tiny spikes on my 750's. Good saws, look better with adult sized spikes. Good job to both of you.

Yep, the originals are pretty tiny...

 

[romeo]

Nice work, whats that cover made out of.

 

[Bob Wright]

The big main cover is 1/4" alum with 1/8" alum for the edge, mig welded together...Bob

 

[Justsaws]

Im right up the road in 'vernon

I have driven thru a couple of times, I'm not very familiar with the area. There seems to be a lot of people from Ohio on here. If I look out my window I see I-70, sometimes it it like a race track.
I've been thinking about casting some clutch covers for certain saws I cannot seem to find them for. Just have to find the time and dust off the smelter. Do not see happening anytime soon but it will eventually.