Help Please

[husky01]

What is the difference with these or how is one better than the other?
3/8 7 Tooth
3/8 8 Tooth

 

[Fifelaker]

7 pin slower chain speed but more torque 8 pin faster chain but less torque.

 

[husky01]

7 pin slower chain speed but more torque 8 pin faster chain but less torque.

do i have to replace the clutch drum when changing sprockets?

 

[Whiskers]

If it's a rim and a drum setup, you just have to change rims.

 

[Fifelaker]

Not if the drum is good.

 

[Rokon]

Should not have to change it.

 

[DSS]

The saw will cut faster with the 8 pin assuming it has the power to pull it. You're essentially putting the chain in a higher gear, but you will lose some torque.

 

[Rustynutz]

8T for short bar 7T for long

 

[husky01]

The saw will cut faster with the 8 pin assuming it has the power to pull it. You're essentially putting the chain in a higher gear, but you will lose some torque.

it should run it its a 385 husky