treeman82
Addicted to ArboristSite
I have been talking with JPS this afternoon about doing some radial trenching at a customer's house. This was after it was suggested to me by Brian, JPS and a bunch of other people a week or so ago in the chat room. I have the measurements, and need help with figuring this out as far as pricing goes as well as loam requirements go.
Overall area is 90' x 170'
3 sugar maples in this area each about 3' in diameter
crown spreads are 50' 60' 60'
They are planted in a bank run type material which goes DOWN.
Also another area has to be cleared of cement slop which has been provided by a tree friendly masonary contractor. The covered area is approximately 40' x 18'
To buy "loam" is approximately $25 - $30 per "cubic yard" and that's before taxes, delivery, etc.
Overall area is 90' x 170'
3 sugar maples in this area each about 3' in diameter
crown spreads are 50' 60' 60'
They are planted in a bank run type material which goes DOWN.
Also another area has to be cleared of cement slop which has been provided by a tree friendly masonary contractor. The covered area is approximately 40' x 18'
To buy "loam" is approximately $25 - $30 per "cubic yard" and that's before taxes, delivery, etc.