sawnami
Addicted to ArboristSite
Finished the re-restoration on my Super 2100.
Sent from my SM-N950U using Tapatalk
Sent from my SM-N950U using Tapatalk
any ideas, running rich? I have the T handle out one turn
Thanks a bunch WalterTurn the T handle or hi speed screw fully closed. Saw should start and idle fine. Cough and die if you try to rev it up. If it revs up it is getting fuel from somewhere it shouldn’t. Check that out perhaps
Thats beautiful Steve, I'll have to find a chunk of wood to take pictures of my 2000Finished the re-restoration on my Super 2100.
Sent from my SM-N950U using Tapatalk
Beautiful saw.
Absolutely gorgeous! Thanks for saving and sharing!
Awesome saw. Looks cherry. Nice job.
Thank you gentlemen!Thats beautiful Steve, I'll have to find a chunk of wood to take pictures of my 2000
Is there a way to test the coil and condenser on my VI-955? I'm still wondering about the side to side play on the connecting rod shown in my previous post. Thanks
I should have stated both the coil and condenser are not on the saw. I wanted to know if there was a way to test them off the sawHold the spark plug in one hand : step 1
Pull starter cord vigorously: step 2
Gauge how bad it hurt: step 3
I should have stated both the coil and condenser are not on the saw. I wanted to know if there was a way to test them off the saw
I was just going to test them as spares. I ordered a new coil, condenser, and points.So if its a points saw I just go ahead and order points , but I have replaced condensers on 2 saws.
Enter your email address to join: