Want to Buy homelite clutch tool....for 1020

[brian.b]

hey guys im looking for the clutch removal tool for a homelite 1020

 

[s sidewall]

Hammer and punch won't get it off?

Steve, Samsung On5 using Tapatalk

 

[brian.b]

they say they are easy to break.......im kinda scared to try it

 

[s sidewall]

Gotcha

Steve, Samsung On5 using Tapatalk

 

[backhoelover]

can you get me a pic of the clutch

 

[undee70ss]

hey guys im looking for the clutch removal tool for a homelite 1020

If you are handy, you can make your own tool, if not try here. http://m.ebay.com/itm/HOMELITE-CLUT...%3Aa99ac63815c0ab1c8af8c04dffff2e03%7Ciid%3A2


A IPL for your saw. http://www.leonschainsawpartsandrep...xp-1130_chainsaw_ipl_23948-a_revision_1_2.pdf

 

[cbfarmall]

This is what you need for outboard or inboard clutches. You didn't specify.

Chris B.

http://m.ebay.com/itm/CLUTCH-REMOVA...%3Aaa1719a415c0a8672e84ad94ffff17a0%7Ciid%3A5

 

[backhoelover]

If you are handy, you can make your own tool, if not try here. http://m.ebay.com/itm/HOMELITE-CLUTCH-SPANNER-WRENCH-921-923-924-944-945-925-1100-1020-1130-C5-C51-C52-/361826997751?hash=item543e91d5f7:g:rH0AAOSwx2dYJ2Hu&_trkparms=pageci%3A41666d7d-5173-11e7-870e-74dbd1807d7c%7Cparentrq%3Aa99ac63815c0ab1c8af8c04dffff2e03%7Ciid%3A2


A IPL for your saw. http://www.leonschainsawpartsandrep...xp-1130_chainsaw_ipl_23948-a_revision_1_2.pdf

+1 in eBay tool

 

[Brushwacker]

Simple, a bit crude looking, but cheap. You can get a couple dowel pins that fit into the 2 holes in the clutch snug, drill holes ( lined up and same diameter as those on the clutch) in a flat piece of metal about 12 inches or more long, 2inches or so wide. You can tack weld the dowels to the flat metal handle in the holes for a 1 piece tool or use it fitting it over the dowels in the holes. Will need to use a piston stop of some sort.