Homelite piston rings

[peteathome]

Can anyone help me with a set of 2 piston rings for a Homelite 300 chainsaw model 10700, HN2810627 1992? The engine is numbered 01710 G-M on the cylinder and 00203 C1 CJ on the crank case. The Homelite part number could be 02263A, up07238 or 07238. Please advise equivalent part if original not available.
I have measured the parts as follows:

Piston ring thickness 0.023"
Piston ring ends flat i.e. no undercut for stop pins
Piston o.d. 1.702"
Piston groove dia 1.510"
Piston ring stop pin dia 0.062" (does need confirming)
Piston ring stop pin to full depth of groove
Cylinder bore dia 1.706" This is a plated aluminium type cylinder.

I also need the following parts for the same saw:

Pulley Homelite part number 97768A/B
Gasket Homelite part number 01729
Screw Homelite part number 88058

Thanks
Pete

 

[bump_r]

Whydja post this in the chain sharpening forum?

I'm just sayin'...

 

[peteathome]

Posted in the wrong place due to inexperience with the site. Thanks for advising. Now posted correctly.
Pete