satdiver
ArboristSite Lurker
Hello all,
I've got an issue with an old saw of mine, it's a Sachs-Dolmar 112. It starts on the first or second pull and runs great, but if you shut it off or if it quits, it won't re-start till it sits and cools for a bit.
Any ideas?
This is what I've checked/done so far:
fresh fuel
fresh plug
fuel filter not clogged
carb taken apart and cleaned/tuned
This thing has me stumped at the moment. I thought maybe the coil was going bad, like it would run till it heated up then open but it still has spark when hot.
Any help would be greatly appreciated! :help:
I've got an issue with an old saw of mine, it's a Sachs-Dolmar 112. It starts on the first or second pull and runs great, but if you shut it off or if it quits, it won't re-start till it sits and cools for a bit.
Any ideas?
This is what I've checked/done so far:
fresh fuel
fresh plug
fuel filter not clogged
carb taken apart and cleaned/tuned
This thing has me stumped at the moment. I thought maybe the coil was going bad, like it would run till it heated up then open but it still has spark when hot.
Any help would be greatly appreciated! :help: