tincherb
ArboristSite Lurker
- Joined
- Dec 17, 2013
- Messages
- 6
- Reaction score
- 3
Recently installed a Drolet Tundra in my home. I was curious if anyone had considered installing or actual installed a hot water coil. I have looked at the three pipe arrangement heat exchanger to see if there was enough room to wrap the center pipe but doesn't appear anything larger than 3/8" tube would work. This might be OK if 2 water circuits were ran and tied together in parallel. Also considered tying a loop inside the firebox as another option but i just hate to slice on my new stove (and yes I should have bought a boiler but I didn't consider it when I bought this so that water is over the bridge). Seems like the space above the vermiculite would be a good spot for a coil. Im just exploring some options for consideration. Thanks.