Tim, that's one VERY good looking specimen you have there. Your Grandfather obviously took great care of it. Keep it in the family! Max.
Tim, that's one VERY good looking specimen you have there. Your Grandfather obviously took great care of it. Keep it in the family! Max.
Where’s the pics rosssCompression tested the saw today. 150 with lots of agressive pulling
I have started it and it ran ok.
Has a gas leak out the vent hole becase the hose is missing.
Going to widen out a doo9 36 inch bar for it.
So far so good.
Will post some pics.
Duck bill valve on the vent plug, unscrew it and see what it looks like on the bottom
I removed the vent plug, the hose is broken off flush with the edge of the vent plug, so no hose on inside or outside.
What kind of place would have a new duck bill valve? It is a saturday so limits options.You do not need a hose, if the nipple is still there on the vent plug just slide a new duck bill valve on it & screw it back in
Sent from my iPhone using Tapatalk
This is the vent plug. Looks like gas hose goes though it and then a duck valve?You do not need a hose, if the nipple is still there on the vent plug just slide a new duck bill valve on it & screw it back in
Sent from my iPhone using Tapatalk
Looks good. Find a bar for it yet?
Enter your email address to join: