Huskybill
Addicted to ArboristSite
At the end of every cutting season when mud season hits my saws are done cutting I completely clean the saw, clean the air filter, lube the clutch, clean the bar groove, dress the bar rails, grease the bar nose, sharpen or replace the chain, change the sparkplug, top off the gas tank. Fire her up do one test cut and she goes away for her nap. If I get no break between cutting I stop and do this maintenance anyway.
If the carb is adjusted correctly the sparkplug won’t foul. But once a year I change it anyway.
If the carb is adjusted correctly the sparkplug won’t foul. But once a year I change it anyway.