robertjinnes
ArboristSite Member
Looking for input on an appropriate carb to replace the non adjustable main jet carb on 3120. Linkages, making carb mount and filter adapters are no problem.
Huski carb is 1 1/16 throttle plate, 7/8 venturi and 1 3/16 choke plate.
Building a sawmill powerhead and don't want to leave it all stock. Want to change out the 9,500 RPM rev limiting ignition coil, bumping the compression, minor porting and muffle mods.
OR has anyone converted the non adjustable Walbro into an adjustable?
BOB the TREEMAN
Huski carb is 1 1/16 throttle plate, 7/8 venturi and 1 3/16 choke plate.
Building a sawmill powerhead and don't want to leave it all stock. Want to change out the 9,500 RPM rev limiting ignition coil, bumping the compression, minor porting and muffle mods.
OR has anyone converted the non adjustable Walbro into an adjustable?
BOB the TREEMAN
