Sold Husky 266/268/272 parts

[Flat47]

Making some shelf space in the shop. Up for sale:

- 268 unfinished project: case with good crank and crunchy bearings, looks to be a good Mahle cylinder and piston is said to have a new ring. Previous owner deleted the base gasket. Plan on a full tear down for bearings. Will come with a good tank (missing one av mount), coil, and handle, flywheel, top cover (one mount hole buggered). $125

- 272 case with good crank and bearings. Case is broken were the serial tag was. $60

- 266 case halves (for two piece ignitions) $25 per side

- 61/66/266/268/272 handle (has a crack near lower mount holes) still usable - best offer

- 268 Gilardoni open port cylinder. Ugly as sin. Missing many fins. Looks usable, though. $20?

- 266 Mahle cylinder. Looks usable, needs to be cleaned - has some minor transfer. $40

- 266 Mahle cylinder. Looks good. $60

- 268 Mahle cyinder. Looks good. $60

- 266 carb (needs kit) SOLD

- 266 coil (two piece, untested, has typical wire insulation cracking) $30

Pics to come.
Probably more parts to list as I clean up the shop.
Open to offers on the whole lot. Buyer to pay shipping.

Thanks!

 

[Toad22t]

Do you happen to have any heated handles for a 272xpg?

 

[Flat47]

Sorry - no heated handle stuff.

 

[cus_deluxe]

bump cuz im curious whats goin on with this stuff

 

[thumbilly]

How bout a 272 carb?

 

[Flat47]

bump cuz im curious whats goin on with this stuff

Ugh...home sick. Kids have strep and I'm starting to feel pretty rotten.

How bout a 272 carb?

Sorry, but nope...I'm in need of one, too.

I will get pics added, but it's going to be another day or two. Sorry everybody!

 

[Flat47]

268 project:

There's a chip out of the case, see pic 1. This thing is rougher than I thought.

 

[Flat47]

272 case:

 

[Flat47]

266 cylinders. All look like they need to be cleaned up. Several to pick from.

 

[BGE541]

Ill take the two piece coil. Let me know paypal info again.

Thanks

 

[Flat47]

Bump.
I'm flexible on prices - this stuff isn't exactly top motch condition. I just want to move some stuff out of the way.

Where did the edit button go? It's gone from my first post.

 

[BGE541]

I asked them to take it away so you couldn't edit the things I wanted

Flat47 is a great seller, still considering some other parts

 

[Flat47]

Thanks for the kind words!

 

[Flat47]

Open to offers on any or all of this stuff.

 

[treeslayer2003]

flat, are you in canada? how bout a pic of the 268 mahle jug.

 

[Flat47]

flat, are you in canada? how bout a pic of the 268 mahle jug.

I'm in Maine and can't edit my first post - the only 268 jug left is the one off the unfinished project. It looks excellent inside, but has part of a fin missing just behind the spark plug. Not sure if that shows in any pics.

 

[treeslayer2003]

is it open or ported?

 

[Flat47]

Making some shelf space in the shop. Up for sale:

- 268 unfinished project: case with good crank and crunchy bearings, looks to be a good Mahle cylinder and piston is said to have a new ring. Previous owner deleted the base gasket. Plan on a full tear down for bearings. Will come with a good tank (missing one av mount), coil, and handle, flywheel, top cover (one mount hole buggered). $125

- 272 case with good crank and bearings. Case is broken were the serial tag was. $60

- 266 case halves (for two piece ignitions) $25 per side

- 61/66/266/268/272 handle (has a crack near lower mount holes) still usable - best offer

- 268 Gilardoni open port cylinder. Ugly as sin. Missing many fins. Looks usable, though. $20?

- 266 Mahle cylinder. Looks usable, needs to be cleaned - has some minor transfer. $40

- 266 Mahle cylinder. Looks good. $60

- 268 Mahle cyinder. Looks good. $60

- 266 carb (needs kit) SOLD

- 266 coil (two piece, untested, has typical wire insulation cracking) $30

Pics to come.
Probably more parts to list as I clean up the shop.
Open to offers on the whole lot. Buyer to pay shipping.

Thanks!

All sold.