Husky 350 chain sharpening

[goosemaster]

I'm working on a friend of mines Husky 350 chainsaw and I was going to go ahead and sharpen his chain but need to know answers to a couple questions. What size file do I need to use? and what angle? Is it 30 degrees? Thanks to anyone who may reply.

 

[middleagemutant]

Need to know what chain hes running

 

[goosemaster]

I have no idea; I'd think whatever the stock chain that came out on it.

 

[dougand3]

Check pitch - measure center to center on 3 rivets. Divide by 2. = pitch. Most (maybe all) 350 were .325", which is 3/16" file.

 

[jakethesnake]

Should be 325. Not saying they never had 3/8 every one I’ve seen was 325

 

[goosemaster]

What diameter file? 5/32, 7/32, etc. Thanks

 

[old guy]

Dougand 3 above told you, 3/16

 

[grizz55chev]

What diameter file? 5/32, 7/32, etc. Thanks

Ever filed a chain before? If not, you got some learnin to do, there’s more than one angle to consider.

 

[goosemaster]

No, I've never sharpened very many chains. Where could I go to read about the right way?

 

[Deleted member 117362]

Ever filed a chain before? If not, you got some learnin to do, there’s more than one angle to consider.

Don't forget the rakers.

 

[grizz55chev]

No, I've never sharpened very many chains. Where could I go to read about the right way?

Google, it’s all there.

 

[goosemaster]

Thanks guy's!!!!!!!!!!