husky 480cd woes

[Johny.W]

just got a new project saw last week a 480cd...... it has a crack in the jug but still gets 130psi? so I thought id just get a now p@s ....... I cant find one that will fit for shore.

I found this one at weedeatermans.com but im not sure if a 54mm will fit what say yall try it?

to weedeaterman
I need a jug for a 480cd will this one fit ? its 2mm bigger but if it fits the 181 I thought it my fit ?
Meteor brand Nikasil plated cylinder and piston assembly
Made in Italy. Highest quality aftermarket kit.
This is the closest to OEM you will find.
For Husqvarna 181*, 281*, 288 & 288XP
Includes: cylinder, piston, rings, wrist pin, cir clips, pin bearing
Replaces OEM part: 503 90 74-71
54mm bore
*Will be 2mm larger than standard 181, 281

Randy W

to me

I can't say, sorry.
Randy
Weedeaterman.com

 

[Duke Thieroff]

The only top end that will fit a 480 is a 480.

No interchange with other models of which I am aware of.

 

[Johny.W]

one off a 77 wont fit?

 

[Johny.W]

Replacement 52mm Cylinder Assembly for Husqvarna models L77, 180, 280, 380, 480. Includes Piston, rings, wrist pin and clips. Made in Italy by Tecomec Replaces OEM: 501 25 02-01......... this is the only after market jug I can find but don't wont to spend that much $ on it any one have a beater source for old husky parts?



http://northwoodsaw.com/store/index.php?l=product_detail&p=1867

 

[Duke Thieroff]

I was wrong then....

That's a good quality top end.

You're looking at at least 100 for new AM top end.

A used one will likely be somewhere around $100 give or take $25.

 

[Johny.W]

ok the 77 L77 280S 380CD 480CB and 480CD all have the same jug ok naw that I have that dawn naw I need a good jug.....