Husky Prototype chain adjuster ..........
Husky Prototype
- Thread starter 04ultra
- Start date
Help Support Arborist Forum:
Husky Prototype chain adjuster ..........
Interesting what people do........I think this saw slipped out of Husky R&D ........
.
BloodOnTheIce
Addicted to ArboristSite
And how is a screw harder to use than this?
jonseredman
ArboristSite Lurker
musta been real desperate to cut some wood
SawTroll
Information Collector
Looks like Roland has been in Sweden again - I guess the design will turn up on a Stihl saw pretty soon.......:greenchainsaw:
Last edited:
BIGBORE577
Addicted to ArboristSite
Is this the first thing you said when you learned to speak? It's about as old.
AUSSIE1
Al.
It would have been alot quicker/easier to modify a metric set screw.
This was what was in my 181 when I got it(set screw not the rope kit).
This was what was in my 181 when I got it(set screw not the rope kit).
nanuk
ArboristSite Guru
Couldn't afford the $3.00 for another tensioner?
2000ssm6
Stihl User
Tommy what have your done to Mr. Drippy????
rms61moparman
Addicted to ArboristSite
Poor people got poor ways!!!
Mike
Mike
joe912
ArboristSite Member
Looks like someone is working on their black-belt in MacGyverism. Well Done!
spike60
Addicted to ArboristSite
Guys, that was just the early single string prototype. I've gotten a peak at the final design at a meeting in Charlotte that was attended by a select few dealers and I was pretty lucky to be one of them.
The final design will in fact have six strings, Chain tensioner as seen, recoil, chainbreak, throttle plate, trigger, and clutch. It is also planned to be a 24 fret design, and a 12 string is also in the works. Naturally, this is the real reasoning behind the Auto-Tune concept, and in addition to standard tuning, at least two dozen open tunings will be programed into the saw. :rockn:
The final design will in fact have six strings, Chain tensioner as seen, recoil, chainbreak, throttle plate, trigger, and clutch. It is also planned to be a 24 fret design, and a 12 string is also in the works. Naturally, this is the real reasoning behind the Auto-Tune concept, and in addition to standard tuning, at least two dozen open tunings will be programed into the saw. :rockn:
I think a bungee cord would be an upgrade.
Pioneerguy600
Pioneerguy600
SawTroll
Information Collector
I probably shouldn't say this, but I guess the whole thing is about luring Stihl into copying it, as they have attempted to do with several other (and real) innovations!
:rockn::rockn:
Last edited:
BIGBORE577
Addicted to ArboristSite
Erick
Addicted to ArboristSite
Jerry you must be my brother from another mother cause I was just thunking the same thing. Bungee cord would have made that a self-tensioning chain tensioner..... us “real world engineers” gotta do all the thinking for them Swedes ya know.
Bob just the time you think you have seen everything, something twisted comes through the door .....
.
SawTroll
Information Collector
But still true - sort of! :biggrinbounce2:
At least when it comes to AV and air filtration design.
...and 4-channel porting, not the least! :biggrinbounce2:
:rockn::rockn::rockn:
Last edited:
ropensaddle
Feel Lucky
Still better than floppy capsopcorn:
opcorn:
