So I got this really nice 2100 last week, it needed a few things like the front to antivibe isolators to begin with so I tore it all down to put those in, give it a good cleaning and a overall check over.
Thought the isolatators would be here today and they were, all one of them :taped: I suppose the others will be along shortly.
Anyway, before I tore it down I fired it up and it runs good but it was leaking gas from the cap and found it had a vented cap and no tank vent in the tank. I never seen one setup like this, I thought they all had that funky vent in the tank, the one thats always missing the cover for it.
I also was surprised to see it had a rubber bushing for a standard fuel line. I already ordered a fuel line with the bushing made into it and it will work fine.
I tore through all the IPLs that I have for a 2100 and the latest I have is dated 1985 and non of them show the plug in the top of the tank where the vent would be or a fuel line to use with a bushing/grommet. Since I dont have the IPL showing this vented cap, anyone know a part # for the one I need?
What do I have here? The serial # is 1010889 and is clearly marked 2100CD.
Also do I need to find the front bracket with either a bushing or a spring that hooks the front of the tank to the case/front spike? Was that a option on these?
Thought the isolatators would be here today and they were, all one of them :taped: I suppose the others will be along shortly.
Anyway, before I tore it down I fired it up and it runs good but it was leaking gas from the cap and found it had a vented cap and no tank vent in the tank. I never seen one setup like this, I thought they all had that funky vent in the tank, the one thats always missing the cover for it.
I also was surprised to see it had a rubber bushing for a standard fuel line. I already ordered a fuel line with the bushing made into it and it will work fine.
I tore through all the IPLs that I have for a 2100 and the latest I have is dated 1985 and non of them show the plug in the top of the tank where the vent would be or a fuel line to use with a bushing/grommet. Since I dont have the IPL showing this vented cap, anyone know a part # for the one I need?
What do I have here? The serial # is 1010889 and is clearly marked 2100CD.
Also do I need to find the front bracket with either a bushing or a spring that hooks the front of the tank to the case/front spike? Was that a option on these?