Husqvarna 235 oil issue

[sre09]

Hello guys. I have a husqvarna 235 that has an oil issue. The bar oil run out of the bottom of the saw and not on the chain. Why?

 

[Stihlbillie]

Oil trough is clogged

 

[sre09]

Oil trough is clogged

I checked it and it isnt

 

[Stihlbillie]

Hmm so you are getting oil to the trough, correct?

 

[sre09]

Hmm so you are getting oil to the trough, correct?

Yes, but when i put the bar and chain the oil doesnt flow anymore

 

[Stihlbillie]

Is the oiling hole on the bar clear and lined up correctly?

 

[sre09]

Is the oiling hole on the bar clear and lined up correctly?

Yep

 

[MarkEagleUSA]

Hello guys. I have a husqvarna 235 that has an oil issue. The bar oil run out of the bottom of the saw and not on the chain. Why?

The 235 oil pump runs continuously while the engine is running. Oil will run out of the bottom of the saw if it idles for any length of time (if the chain isn't moving there's no place for the oil to go and gravity takes over).

 

[sre09]

The 235 oil pump runs continuously while the engine is running. Oil will run out of the bottom of the saw if it idles for any length of time (if the chain isn't moving there's no place for the oil to go and gravity takes over).

Yes i know that but when the chain is moving i dont see any oil at all on the chain but i see the oil on the bottom.

 

[sre09]

Problem solved, the worm gear was worn out.