Husqvarna 235

[TXPROSTAR]

Husqvarna 235 Help

I have a almost new saw and the fuel line builds up pressure and it is not flooding the saw but I feel starving the saw for fuel. I disconnect the fuel line and clear the pressure the saw will run for another 10-15 min and then same problem. I would appreciate any advice that can solve my issue...

 

[Zippy]

Is it building pressure or vacuum?

Next time it struggles, try just cracking the fuel cap to release any vacuum and see what happens.

If you've got a vacuum pump you could empty the tank, take the hose off the carb and use it to pull a small vacuum. It should clear.

If either of the above test show you're holding a vacuum then your vent isn't working.