stilh036prohog
ArboristSite Guru
I bought the saw about two months ago. It was a running saw. It had a few problems. I tore it apart to clean it. I found a few problems but fixed must of them. Put back together and it started in 3 pulls. I was running it without the clutch cover off to see if was oiling and it was. Then the clutch came off, something I didn't touch. I never took the cylinder or flywheel off. While waiting for a new clutch bearing I tried to start it and couldn't hardly pull it over. Piston looks new and has strout compression. Things I replaced throttle lock spring,brake band,exhaust bolt, fuel line, chain catcher,clutch bearing all oem. It's needs a new spring that holds the flag to the clutch cover. Pn 501874701. Plus to two anti-vibe spring on the handle are not broke but should be replace. Oh it's oem mahle cylinder that has 54 stamp on it. I just don't need a 81cc saw. Plus I can't crank this monster. 350.00 plus s/h. Pho
Got I new oregon 28 and 24 bars and chains that will sell by them self. Now some pictures.
Got I new oregon 28 and 24 bars and chains that will sell by them self. Now some pictures.