This saw had some scuffs on the piston so I cleaned it with some fine grade emery cloth and installed new caber rings. Scuffs appear to be from the saw starting to cold seize. Guy like to start it and instantly rev the crap out of it.
I also opened up the lower transfer and installed a 395 coil. Pressure and vac tested. Muffler opened up.
ASKING 850 PHO plus shipping.
If you want pictures of the piston I will gladly pull the muffler and send them to you. Compression is 150 after 1 tank of fuel thru it.
There is a screw thru the rewind cover to hold the rewind spring in place. Plastics are faded but have been cleaned up.
I also opened up the lower transfer and installed a 395 coil. Pressure and vac tested. Muffler opened up.
ASKING 850 PHO plus shipping.
If you want pictures of the piston I will gladly pull the muffler and send them to you. Compression is 150 after 1 tank of fuel thru it.
There is a screw thru the rewind cover to hold the rewind spring in place. Plastics are faded but have been cleaned up.