WKEND LUMBERJAK
Addicted to ArboristSite
FWIW, 130 is not bad on compression, although it should be higher with a new jug/piston/ring, that's besides the point.
One thing you can do is pull the spark plug and put the end near the threads, do you see a spark when you pull the starter rope?
Sounds like your not getting spark, IMO. I would start trying to figure out if it is or not getting spark. This is the easiest thing to check without tearing everything apart and/or replacing parts.
I just rebuilt the same saw had same problem as OP - the lower compression. changed out plug as I had spark just would not fire. Just because they show spartk doesnot mean it will fire under compression.