Want to Sell Husqvarna 359xp bgd/ported

[t4driller]

I have for sale a husqvarna 359xp. Its a pretty nice saw but has some scratches and scuffs from normal use. The bottom of the case under the chain catcher has the most wear/ damage. Theres no cracks or breaks in the plastics. I did a base delete, port work, and muffler mod. Has the 199 carb thst I put a carb kit in and drilled a hole in the cover. The piston is a hyway piston. I dropped the original piston (2nd one I dropped) and it took a little knick out of the skirt. [emoji17] I was going to use a meteor piston but after measuring the hyway, it was almost identical to the oem piston. There was a difference of .002 from pin to crown. Everything else was the same. Actually was a nice piston for aftermarket. I put a caber piston ring, oem pin and clips in it. The cylinder had very low hours and was not scored or anything. Used hondabond ht to seal the cylinder on. The intake boot has a 372 style metal clamp on it. Muffler has a second port with a 288 style deflector. Also cones with oem dual felling spikes. I think that's it, but if you have any questions just ask. Selling as pho $425 plus the ride. PayPal friends and family or add 3% for fees. If you would need a bar and chain I probably have one I could get rid of.

Sent from my SM-G930V using Tapatalk

 

[t4driller]

More pics

Sent from my SM-G930V using Tapatalk

 

[t4driller]

I'll try and get a video in the next day 2

Sent from my SM-G930V using Tapatalk

 

[Ryan'smilling]

Great seller here gentlemen. My t4driller 350 is one of my absolute favorite saws to run. It arrived exactly as Mike described it, and puts a smile on my face every time I squeeze the trigger.

 

[t4driller]

Great seller here gentlemen. My t4driller 350 is one of my absolute favorite saws to run. It arrived exactly as Mike described it, and puts a smile on my face every time I squeeze the trigger.

Thanks Ryan, glad to hear it's still slaying some wood..

Sent from my SM-G930V using Tapatalk

 

[sunfish]

Nice, would be a killer firewood saw!!!

 

[t4driller]

Nice, would be a killer firewood saw!!!

Yea it would!! And the dual spikes keep it from doing the classic husky flop... lol

Sent from my SM-G930V using Tapatalk

 

[t4driller]

Obo..

Sent from my SM-G930V using Tapatalk

 

[t4driller]

Bump, 380 plus the ride

Sent from my SM-G930V using Tapatalk

 

[cuinrearview]

Damn Mike. If you didn't already have one of my saws this would be a no-brainer for me. GLWS sir.

 

[t4driller]

Damn Mike. If you didn't already have one of my saws this would be a no-brainer for me. GLWS sir.

Thsnks man.

Sent from my SM-G930V using Tapatalk

 

[t4driller]

a video of it running. Chains a little aggressive. Rakers are set at .040 for my dolly and 66.

Sent from my SM-G930V using Tapatalk

 

[t4driller]

wrong video[emoji53] this is better

Sent from my SM-G930V using Tapatalk

 

[dustinwilt68]

Bump for a great builder/porter, best deal on the site.

 

[chipper1]

Bump for a great builder/porter, best deal on the site.

What about that MMWS 2166 .

 

[dustinwilt68]

Great saw, but 2x the $, so I stand by my former comment.

 

[chipper1]

Great saw, but 2x the $, so I stand by my former comment.

I hear that Dustin, but deals are relative, but for a 60cc saw I agree .
The 359 is one of my favorites as is the 555, very underestimated saws and hard to beat the price point, and ported they are even better.

 

[dustinwilt68]

Guys are emissions out non this saw, it is nicer in person