WTS modded 365 xtorque with 20" b/c. Its had the transfer baffles removed and the work was done by Cambl. For those of you that don't know, a 365 with the transfers ground out is essentially a 372xp. As you can see from the pictures, the saw looks brand new. The only "ugly mark" on it is the God awful muffler mod that I shamefully created. I purchased a new muffler bracket so it can be bolted over the mod if one was so inclined. I put a 346 xp coil on it that is limited to 14.1k. As you can see in the picture of the standard blue coil, a part of the plug wire twisted off in the threads when I removed it. It can be removed and the stock coil can be used if you'd like as there is nothing wrong with it. There is nothing wrong with the saw and there are still obvious machine marks on the piston. I never cut any wood with it. I got it from cambl, modded the muffler, replaced the coil, and its been in a Husqvarna powerbox in my garage ever since. I'm asking $550 $500 plus shipping.