Sold Husqvarna 55 Project Saw

[Manugoss]

Up for sale is a husqvarna 51/55 with a almost new aftermarket H55 top end(ebay Kafar). The saw is complete it has spark but will not run properly. I ran less than a tank of gas with this topend on. I try to adjust the carb without much success. I took it apart to try to find the problem and that is when it was stored 6 years ago. I do not need this saw anymore so I rather sell it. The compression is 160+ dead cold. The saw is missing the on/off switch as well as 1 starter/recoil screw. If interested, I will include bar + Used OEM H51 Piston/cylinder (scoring might be able to salvage) + New caber ring for H51 + H55 locked Crankcase. I am sure that someone can get this baby to run properly with proper diagnosis. I will be putting up for sale on ebay soon if nobody is interested. Thanks

175$ everything Shipped to USA

 

[cus_deluxe]

probably my favorite family of saws, reliable and cheap to keep running. Any pics of oem 51 cylinder?

 

[Manugoss]

The piston has a deep scratch on the side but the cylinder is in decent shape. The is a small defect all the way in the cylinder. It cannot be seen on the picture. My guess is that it is above the piston and ring and would not affect fit. See pictures below.

 

[Manugoss]

I took a better picture of the inside. After inspection, on one side of the cylinder there is a small scratch as well. I guess it could be used as an experiment along with the piston and new ring more that anything.

 

[cus_deluxe]

Nice!

 

[bigmoose]

Pm sent

 

[Manugoss]

Sold ! Waiting for payment.