I saw it on Ebay/Craigslist

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Eccentric

Eccentric

Mister Wizard
Joined
Jan 21, 2007
Messages
14,224
Location
Northwestern Wyoming
Oregon chain with "27" on the drivers should be .404-.063G micro chisel chain..........NOT 1/2" pitch. The "30" that's on the cutters is the recommended depth gauge setting........and that also corresponds to .404 chain. My Oregon 1/2" chains are marked "40" for the depth gauge setting. Oregon 1/2" chain that I've seen has been marked "10", "10C", "10S", or "10L" on the drivers...

Chain Saw Chain

Thanks for the sharp eye and correction. I did not dig into it - was just reposting the link, because I know that a lot of guys would like to find 1/2 inch chain.

Caveat emptor!

Philbert

No problem. I sent a message to the seller informing him of the error. He thanked me and corrected the listing title to reflect that it was .404 pitch chain. Still left the description the same (with 1/2" pitch wording) though...
 
struggle

struggle

Got stumps?
Joined
Feb 9, 2009
Messages
4,020
Location
Iowa
Me thinks that's not a 42" bar on the 051. Nice prices though. I'm quite certain guys on here are tripping over themselves to get at the 2.2:msp_w00t:
 
thomas1

thomas1

sodium pentothal
Joined
May 2, 2010
Messages
3,651
Location
floating down the river of tears that gushes forth
Last edited:
Top