I Want To Build A Load Handler

[kstill361]

Others may have some ideas but I gave up on the idea

 

[rwolf15241]

My project info -so far

Loadhandler Project

1. 1 inch steel bar x 7ft
2. Drag Sheet / Teflon coated 6ft x 16ft
3. 2 - 1inch pillow block bearings
4. 4 x 1 inch collars
5. 2 ft hand crank made from 1 inch tubing with a 8 inch handle- on the Drivers side
6. Gear driven winch with remote to unload while trailer is moving- on the Passenger side
7. 6 x 2 Angle Iron welded to top end of tail gate to mount pillow blocks- With thumb screws for quick removal.
8. 12 inch swivel tire mounted on end of tail gate to support tail gate while moving
9. 6 ½ x 10 Rubber Liner for trailer, to aid in drag sheet.

 

[Derik L]

I have been also trying to come up with something like this.

 

[hank55]

I would think a hand crank boat winch would work ,use small cable ,and attach a pulley to where the loadhandlers crank handle should be.

I just bought one today, in its the mail, i will be fixing one up somehow , probable use a ratchet wrench a cheater bar. I will post pics .