In over my head...Remington Pro 88 UPDATE w/ video

[67L36Driver]

Nice job! How was the sprocket? Have you tried cutting with it yet?

I just remembered, mine is missing the little retainer thingy to hold the air filter cover in place.

Try searching evilbay seller kpoutdoors. He usually has a pile of Remy stuff listed.

 

[Honest John]

Nice job! How was the sprocket? Have you tried cutting with it yet?

I just remembered, mine is missing the little retainer thingy to hold the air filter cover in place.

Sprocket is questionable. The saw vibrates more than it should. All my fuel here at the house is mixed at 40:1 so I need to get some more fuel and go heavier on the oil so I can do some more testing. I runs, but rough. I'll continue to tinker with it and hopefully get it dialed in.

 

[67L36Driver]

40:1 is fine using synthetic mix for the old turds.

That being said, I did run across a fellow in Grandview, Mo. who runs 16:1 in his old Homelites. Must be a terrible thick cloud when he runs a saw. Yikes!

 

[buzz sawyer]

Sprocket is questionable. The saw vibrates more than it should. All my fuel here at the house is mixed at 40:1 so I need to get some more fuel and go heavier on the oil so I can do some more testing. I runs, but rough. I'll continue to tinker with it and hopefully get it dialed in.

Hope you have better luck at finding a sprocket than I was. I'm running about 45:1 synthetic in everything I have.

 

[buzz sawyer]

Try searching evilbay seller kpoutdoors. He usually has a pile of Remy stuff listed.

Thanks, will do.