jonsered 52e

[crashagn]

ive been looking for a bar/chain and sprocket rim assembly for my saw.. went to the oregon websie and they wanted way to much for the combo and powermate rim sprocket system..$68

So im a avid ebayer and i looked up the same stuff off of oregons website

i found so far= teeth -- size -- guide-- sprocket
oregon prolight bar 33sl078g 78 -- .325-- .50 -- 8
powermate rimsprocket system .325 -- 8

now i need a chain 78 .325 .50

Heres the info off of oregons website
combo 200slgk095 78 .325 .50 8
21238x rimsprocket system .325 8

and i went here to look up the chain
http://store.baileys-online.com/cgi-bin/baileys/153
do i have the right slection for the chain to match the bar?? I think i looked up the right info was needing someone to verify that i have this correct

Tks for the support

Now to find some chaps...

 

[HiOctane]

Your Oregon selection is ok,the chain will match the blade.

 

[crashagn]

Cool tks HighOctane.. didnt know if saving $20 would save me a headache or not

 

[SawTroll]

Avoid the 33SL chain with the large safety bumper tie-straps.
There are much better .050 options out there, as Stihl 23RS, Oregon 20LP and the Narrow Kerf (NK) 95VP.

Baileys WP 20LP is another NK chain that should work well, take a look at this tread.
Any of those chain should work well on your saw, with either a 7 or 8 pin .325 rim.