• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Jonsered 625 / Husky 268 conversion

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cambl

ArboristSite Guru
Joined
Nov 3, 2011
Messages
501
Reaction score
218
Location
Left Coast
This saw started out with nice 625 cases and crank, new style, same as 670. New Meteor 50mm 268 p/c kit with closed ports and windowed piston.

New bearings, seals, o-rings, gaskets, carb kit, muffler, ignition, clutch, drum, brake assembly and top cover. The top cover, brake, and muffler are aftermarket 268. Muffler has the 268 deflector and fire screen.

I have run lass than a tank through it, runs great, compression shows 120 psi but the base gasket is fairly thick and ring has not fully seated... or my gauge may be reading a little low. Feels strong.

$280.00 power unit only, shipped to lower 48 insured.

Please start a conversation if interested.

100_7004.JPG 100_7005.JPG 100_7006.JPG 100_7002.JPG 100_7001.JPG 100_7049.JPG 100_7007.JPG 100_7077.JPG
 

Latest posts

Back
Top