Jonsereds 52 flywheel fan

[promechanic]

Is there a current source for the plastic fan for the 52/52E saws? I saw some older posts where someone was 3D printing them. Most of the used ones I've seen are pretty crusty by now. On a side note, is it possible to swap a complete ignition from a 49SP?

 

[Cantdog]

Not really unless you swap the cyl and the 49 points ign as well because the coil on the 49 mounts to the cyl and the 52 spark coil mounts to the recoil cover so there is no mounting lugs on the 52 cyl