Jonsy 490 oiler problem

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

msjanket

ArboristSite Operative
Joined
Feb 12, 2007
Messages
143
Reaction score
12
Location
Willington, Ct
My 490 oiler adjustment via screwdriver only allows 180 degrees of screw movement..Is this normal? I'm assuming that counterclockwise means more oil on the blade? Am I correct in my assumptions?
Most of my other saws have oiler adjustments that encompass several complete rotations of the adjustment screw. Just wondering if the 490 is radically different.

thanks, all

Mike
 
The screw would fully rotate without the limiter plate, but it wouldn't give more oil. It is a much different design than the older Jonsereds. Too much screw movement and the suction will be lost from the tank because that part of the shaft will lose contact with the rubber seal on the pickup.

At least that is the way I think it works.
 

Latest posts

Back
Top