jasult
ArboristSite Operative
I have been burning my Encore for many years just using a stove connector and pipe stuck up the damper and into the flue a few feet. I was never happy with this setup. Now I want to install a liner all the way up but the encore needs 8 inch liner. My problem is getting past the damper and smoke shelf with a 8 inch pipe. The damper frame is still in but i removed the damper years ago. Any one ever remove damper frame and cut a few of the yellow firebrick to allow for the liner. I don't feel like crushing a brand new liner to force it into the damper opening and then can't run brushes down to clean it. I am going to call a few liner manufactures for their take as well.
thanks
Jim
I am also thinking of just going with this 6 inch that member Coog suggested back a few months ago when I asked this same question
http://cgi.ebay.com/Chimney-Liner-6-x25-last-5-feet-oval-w-round-adapter_W0QQitemZ170404217142QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27ace20136#ht_1117wt_911
thanks
Jim
I am also thinking of just going with this 6 inch that member Coog suggested back a few months ago when I asked this same question
http://cgi.ebay.com/Chimney-Liner-6-x25-last-5-feet-oval-w-round-adapter_W0QQitemZ170404217142QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27ace20136#ht_1117wt_911
Last edited: