Tree Machine
Addicted to ArboristSite
And another
I like this pic. It's a sycamore, which I had quarter-sawn into fat-dimension stair treads.
I like this pic. It's a sycamore, which I had quarter-sawn into fat-dimension stair treads.
Log haulers
- Thread starter Greg
- Start date
Help Support Arborist Forum:
Tree Machine
Addicted to ArboristSite
Here's another view
I actually broke the winch cable on this one, but that's easy to fix with a welder. Here, I had to back into a tight area. It was on this log that I learned to always drop the trunk on a couple limbs laid crossways so that you can get the cable under.
I actually broke the winch cable on this one, but that's easy to fix with a welder. Here, I had to back into a tight area. It was on this log that I learned to always drop the trunk on a couple limbs laid crossways so that you can get the cable under.
Tree Machine
Addicted to ArboristSite
Messed up again.
Dang it, I'm messin up. Repeat picture. Sorry. Try this one.
Dang it, I'm messin up. Repeat picture. Sorry. Try this one.
Tree Machine
Addicted to ArboristSite
No more computer for me. I'm grounding myself.
Tree Machine
Addicted to ArboristSite
Non-conventioonal
OK, just one more. Here I'm using the arch in a non-conventional manner. No rules here that says you can't.
OK, just one more. Here I'm using the arch in a non-conventional manner. No rules here that says you can't.
Tree Machine
Addicted to ArboristSite
As long as we're being non-conventional
This was one of my more favorite uses with the arch.
This was one of my more favorite uses with the arch.
Tree Machine
Addicted to ArboristSite
Log arch showdown
I keep finding shots I forgot I took.
I keep finding shots I forgot I took.
Tree Machine
Addicted to ArboristSite
Non-conventional travel with the arch
On this day, I found that I could mount the middleweight arch on my chipper and get both the arch AND the chipper to the jobsite together. I'm not recommending you do this, I'm just showing it can be done. I could put the arch on there and secure it in under 20 seconds, remove it in under 10.
FYI: The chipper is jacked up because I had just welded a $2 mount on the back of the chipper. This allowed me to use the chipper's on-board jack, and it worked GREAT.
On this day, I found that I could mount the middleweight arch on my chipper and get both the arch AND the chipper to the jobsite together. I'm not recommending you do this, I'm just showing it can be done. I could put the arch on there and secure it in under 20 seconds, remove it in under 10.
FYI: The chipper is jacked up because I had just welded a $2 mount on the back of the chipper. This allowed me to use the chipper's on-board jack, and it worked GREAT.
Tree Machine
Addicted to ArboristSite
I'm glad you guys like these pics so much. Much good response.
Here in this pic I had to get a tree off a house. I winched it up with a Maasdam rope winch (come-along) and inched the trunk away with the middleweight arch. Once the crown was away from the gutters we put it on the ground, one click at a time. This may seem slow, as compared to a GCRS, but only took a few minutes to get it to the ground (alone). The next picture is good.
Here in this pic I had to get a tree off a house. I winched it up with a Maasdam rope winch (come-along) and inched the trunk away with the middleweight arch. Once the crown was away from the gutters we put it on the ground, one click at a time. This may seem slow, as compared to a GCRS, but only took a few minutes to get it to the ground (alone). The next picture is good.
Tree Machine
Addicted to ArboristSite
Arching out fallen, but upright trees w/ the arch
Hoist it up off the trees it fell on, hook up the arch, walk it out, lower it down.
This next pic is a really nice one too.
Hoist it up off the trees it fell on, hook up the arch, walk it out, lower it down.
This next pic is a really nice one too.
Tree Machine
Addicted to ArboristSite
Standing, fallen trees with the arch
This is a shot, a long, tall cherry failed at the base and fell toward the house, but hung up in the trees. I set all the ropes and rigging on this one from the ground using the big shot and flyline, also solo.
This is a shot, a long, tall cherry failed at the base and fell toward the house, but hung up in the trees. I set all the ropes and rigging on this one from the ground using the big shot and flyline, also solo.
Tree Machine
Addicted to ArboristSite
Last photo for awhile
I'm firing out these images to you just before leaving on vacation, so I may not post for a month.
I hope you've enjoyed the images. Now, make it a NewYear's resolution to give your own back a break and make your groundies that much more efficient. Get a set of arches, or all three, AND HARVEST URBAN TIMBER. I'll leave one last post with info on this from two noted authorities; one of the publications is free, the other is to be published this April, 2003.
As for this image, we had gotten the long log onto the ground, when the neighbor stopped over. "Hey, could I get the firewood from you?". I threw a second arch on the log and said, "Yea, help me push it over to your firewood pile." which we did, and then I sunk a Husky 394 into it to make short work of it right there where it needed to be.
I'm firing out these images to you just before leaving on vacation, so I may not post for a month.
I hope you've enjoyed the images. Now, make it a NewYear's resolution to give your own back a break and make your groundies that much more efficient. Get a set of arches, or all three, AND HARVEST URBAN TIMBER. I'll leave one last post with info on this from two noted authorities; one of the publications is free, the other is to be published this April, 2003.
As for this image, we had gotten the long log onto the ground, when the neighbor stopped over. "Hey, could I get the firewood from you?". I threw a second arch on the log and said, "Yea, help me push it over to your firewood pile." which we did, and then I sunk a Husky 394 into it to make short work of it right there where it needed to be.
Tree Machine
Addicted to ArboristSite
Urban timber resources
This was one of the two presenters at TCI who spoke on Utilization of municipal trees.
This was one of the two presenters at TCI who spoke on Utilization of municipal trees.
Tree Machine
Addicted to ArboristSite
The link to the log-recycling authorities
And this is the other guy. Steve Bratkovitch. You can pretty much consider him the Guru, the Grand Poobah, the Illustrious Magistrate of Urban Tree Recycling. I am but one of his disciples.
You all have a great holiday season. I'll see you back in another month. warmer climates call me. --TM--
And this is the other guy. Steve Bratkovitch. You can pretty much consider him the Guru, the Grand Poobah, the Illustrious Magistrate of Urban Tree Recycling. I am but one of his disciples.
You all have a great holiday season. I'll see you back in another month. warmer climates call me. --TM--
murphy4trees
Addicted to ArboristSite
Treemachine,
I've been off line for the last week and was glad to see all your pics and how effectively and creatively you've been using the arches...
It may be a while before mine sees action again.. so the pics will have to wait...
A couple of weekends ago Big John, a homeowner, and I dropped a pretty big maple.... maybe 65' and 36" DBH. The homeowner had a big hole in he back of his property... very tight access.. no truck of loader could make it.... but we managed to get rid of all the big wood in less than an hour... which more than made up for the extra 2 hours I would have had to drive to get a big truck on and off the job, not to mention loading and disposal..
There was zero damage done to his landscape. This would not have been possible without the machine.
I too wonder at some of the lack of response on some threads.. I guess you have to see this thing in action to really get a sense of what it can do..
Keep up the good work.
God Bless All,
Daniel
I've been off line for the last week and was glad to see all your pics and how effectively and creatively you've been using the arches...
It may be a while before mine sees action again.. so the pics will have to wait...
A couple of weekends ago Big John, a homeowner, and I dropped a pretty big maple.... maybe 65' and 36" DBH. The homeowner had a big hole in he back of his property... very tight access.. no truck of loader could make it.... but we managed to get rid of all the big wood in less than an hour... which more than made up for the extra 2 hours I would have had to drive to get a big truck on and off the job, not to mention loading and disposal..
There was zero damage done to his landscape. This would not have been possible without the machine.
I too wonder at some of the lack of response on some threads.. I guess you have to see this thing in action to really get a sense of what it can do..
Keep up the good work.
God Bless All,
Daniel
arborguy
New Member
Tree Machine, your pic were great! It really looks like something I could use. But my major dilema is getting the big wood out of the backyard through a narrow gate (approx. 36"). Anybody have bright ideas?
treeclimber165
Member A.K.A Skwerl
With wood fences, it's sometimes easier to remove a section of fence. I keep a hammer, prybar and nails in my truck for those occassions. Older fences go back up a lot easier with new nails, rather than trying to straighten out the old rusted nails.
Chain link fences can be more challenging to put back up, I usually just cut everything up smaller(3'-4') and use the small log dolly on those jobs unless something else can be figured out.
Chain link fences can be more challenging to put back up, I usually just cut everything up smaller(3'-4') and use the small log dolly on those jobs unless something else can be figured out.
arborguy
New Member
same here, or we'll tow the logs out with our Hiab if the route is fairly straight
Tom Dunlap
Addicted to ArboristSite
Chain link fences are a piece of cake to open up. Unbolt the end strap to slack off, pop off the top rails and pull back the fabric. If you need to get in mid span, just unscrew a piece of wire. The vertical strands just corkscrew into place. To re-tension there's a special tool to use. I bought one from a fencing wholesaler.
My cordless sawzall is the best for cutting nails out of old fence panels. The panels don't get so torqued and chewed up from prying on them. Galvanized deck screws pull things back in place.
Tom
My cordless sawzall is the best for cutting nails out of old fence panels. The panels don't get so torqued and chewed up from prying on them. Galvanized deck screws pull things back in place.
Tom
johncinco
Addicted to ArboristSite
I finally read through that thread after seeing the topic and ignoring it until now. I certainly think you have the picture resizing and posting down perefect now. Great pics! Great use of wood rather than just firewood. I can see you have the attitue I would have in using that thing, hey if it will work and get the job done, use it. I can think of a 100 things that will come in handy for. Can you just buy one, like the middle size, and not take all three? I can't wait to find one and put it to use. man, no more hauling wood one wheel barrell after another, just haul the log where you want it, and then cut it up. I will still need th ehot tub fo rmy back, just have more time to sit there! JB Of course you wont see this til you get back.
