Makita 6401 BB RPM

[RNeurath]

Hey guys,I have a 84cc BB top end on a Home Depot rental that I want to use on a 30" Alaskan mill.The saw is broken in and runs strong.I read where it is advised to set a saw up a little rich when milling.Just wondering what other folks with one of these BB kits are setting the RPM at WOT.Right now I'm at 12500 and it definitely 4 stroking. Thanks,Ron

 

[smokinj]

I think stock is 13500 and for milling 12500 sounds good.