Hello All,
I just wanted to give you an update on everything. Joey and I were able to get together one evening and get to working on this saw.
First off, Thank you Mark for pointing me his direction... and you were right, all my problems went away.
Within an hour, he had pulled the carb apart had everything cleaned out and rebuilt.. put it back together and it was running better than it was before it got clogged.
For ANYONE who might be looking to get one of these yellow saws fixed, I HIGHLY recommend you get in touch with him and ship it to him if you are not close enough to drive. He is VERY knowledgeable and a very personable guy as well. I would have never been able to get it all back together and working again on my own. Nor did I have the knowledge on how to properly tune the saw after it was running.
A huge shoutout to JoeyMT33 for all of his time and help. Here are some videos to enjoy.
https://www.youtube.com/watch?v=FcNAv4-Cle8
https://www.youtube.com/watch?v=1UB6Sh_ysKM
https://www.youtube.com/watch?v=QWTWw14Klcs&feature=youtu.be