stihlatit
Addicted to ArboristSite
- Joined
- Dec 12, 2005
- Messages
- 1,931
- Reaction score
- 75
Love the setup Trigger. Is it possible to get a few action shots where you are using the saw on the mill. Thanks and keep up the great work.
stihlatit said:Love the setup Trigger. Is it possible to get a few action shots where you are using the saw on the mill. Thanks and keep up the great work.
Trigger-Time said:Thank you, and yes on the pics, it maybe after Thanksgiving
Gary
well sounds like you are thinking this through gary... this setup is similar to the one I used on the jig I built for my Ripsaw. Instead of black pipe, I had smaller metal pins going into holes drilled into metal strip stock that had 1/4 inch increments. I solved the problem of having to move the rails (in my case a 3x6 solid plank fortified with 1 inch square stock) along with my Ripsaw on them, by always stepping down the "rail" on the opposite end of where my saw was. Thus was easy without that weight.Trigger-Time said:I need to get some black pipe
for the cross pieces that hold up the rails, it will need two for
each end, one on each end would work but with two I won't need
to hold up the weight of the rails & saw to drop to the next hole.
...and of course you are not limited just to the thicknesses your holes are apart, as you can always adjust the csm up or down between cuts if I'm following all this correctly. Your tracking idea is interesting... if you want something a little less complicated you might just cap off the top of the rails with say 1" wide 1/4" thick metal strip for the csm to ride on instead of the bare wood.Trigger-Time said:If you are to make something like this remember, for the board thickness that you want, your holes will need to be the thickness PLUS the kerf of your chain apart.
woodshop said:if you want something a little less complicated you might just cap off the top of the rails with say 1" wide 1/4" thick metal strip for the csm to ride on instead of the bare wood.
Trigger-Time said:A few more pics.
Gary
Andy , they were here a couple of weeks ago but gone now .Andy Harden said:I can't seem to find your pics. Is it my browser?
Andy Harden said:I can't seem to find your pics. Is it my browser?
tawilson said:"Andy, I made a change to the table, and to save storage space I deleted
the old pics."
And screwed up a good thread with great pics. What were you thinking?
Upload the pics to this site and don't worry about it. Glad I downloaded a few.
tawilson said:Sorry, I don't use the smiley's any better than I do the English language, I'd probably just make things worse. I was joking around, but sometimes my humor is so subtle it actually disappears. And no I didn't know there was a limit per user. And you maxxed out in just three months! You been busy. (did I do that right?)
Adrpk said:As far as I know we can use it all.
tawilson said:"I would put the pics back, but I have deleted them out
of my hard drive. Sorry"
What were you thinking!
Enter your email address to join: