Modified Bar for Homelite 2100

[MudgeHollowBeaver]

Does anyone have experience in modifying a Husky D009 mount or a Stihl 3003 mount bar to a Homelite F014 (9.5mm studs) mount? The slot size on the Husky is correct or I can make a spacer to fit the 12mm Stihl slot. Just wondering about the tensioner and oiler hole locations, and the tail width.

 

[Coralillo Lo Pro]

Does anyone have experience in modifying a Husky D009 mount or a Stihl 3003 mount bar to a Homelite F014 (9.5mm studs) mount? The slot size on the Husky is correct or I can make a spacer to fit the 12mm Stihl slot. Just wondering about the tensioner and oiler hole locations, and the tail width.

Seems the very broad tail Homelite F014 mount is not compatible with many more tapered standard mounts like D009/3003. Have more luck with a 3002 with 14/9.5mm spacer and even then might have to cut the tail some to widen it enough. Tensioner/oiler hole are easy to drill new ones, the main issue is the tail shape.

 

[MudgeHollowBeaver]

Good suggestion....thanks for your reply.

 

[Bill G]

Call Bill Davenport and give a a great guy a few pennies

 

[Lightning Performance]

I run the F014 modified on my 084 with a 12mm slot.