norry
ArboristSite Lurker
OK, one more dumb question for you guys. So I pulled the decomp valve, because I don't have Pro plastics and I wanted to get the top cover on so that it will cool properly. Finally cut down a 3/8x24tpi bolt (close enough to the weird M10x1.0 to fit, with a copper gasket I had sitting around the shop) so that it closes that hole nicely without fouling the piston.
Went to attach the top cover, and - oops. This cylinder doesn't come with the studs to mount it. My original cylinder has them, but I can't see how to get them out. There isn't enough thread to double nut it, and there isn't enough unthreaded area left to clamp on. What do you recommend?
Thanks again! This has been a real voyage of discovery for me to say the least, and I really appreciate the help everyone here has given me.
Went to attach the top cover, and - oops. This cylinder doesn't come with the studs to mount it. My original cylinder has them, but I can't see how to get them out. There isn't enough thread to double nut it, and there isn't enough unthreaded area left to clamp on. What do you recommend?
Thanks again! This has been a real voyage of discovery for me to say the least, and I really appreciate the help everyone here has given me.