Lignator
Swamp Yankee
when you make a gasket, are you spraying it with something like copper aerosol or just bonding it in place?
try knocking that lip off the lower transfers. I've done that on other saws with this design of transfer port and had good results. just don't go too crazy. i believe it slows down the velocity of the charge as you enter the combustion chamber.
I ordered a set from the dealer for my 034 super, couldn't tell ya if it work for you, but here they areupdate. Ran the saw this weekend. Didn't have access to any worth while logs, everything is snowed in, only was able to cut some 8" stuff.
Saw started easy and ran well.
Cold compression is ~185psi. Squish still at .021.
I need to recheck where all my timing #'s ended up at.
Opened the 2nd exhaust port up even further.
One question: are there any small double felling dog options out there? I don't really want or need the big dogs but do like having an outer dog. Any input would be awesome.
Got a few pics of my port work that I want to get posted. This was the first cylinder I am pleased with how the exhaust polished up. I used scotch bright in the dremel and it seems to have worked well.
Looking pretty darn good. I'd say your a naturalsquish band polished up, exhaust stock, transfers had the lip knocked off of them
View attachment 402110
exhaust roughed in. I didn't go to crazy enlarging the outlet. I might go back in and take more out.
View attachment 402112
Piston skirt trimmed on intake side. Should I remove all of it? I left the 2 edges to maintain my length to diameter ratio of the piston.
View attachment 402114
Intake roughed in. I made it quite a bit wider than stock and cleaned up all the parting lines on the casting.
View attachment 402115
Exhaust cleaned up
View attachment 402117
Inside of the exhaust. I was able to clean up the the little nicks from where I ground the plating back.
View attachment 402118
Yeah, those look reasonable. I don't want / need the big ones, just reduced the effective bar length. I like that lowest spike on the inner dog is more substantial.I ordered a set from the dealer for my 034 super, couldn't tell ya if it work for you, but here they areView attachment 402120View attachment 402122
Thanks!Looking pretty darn good. I'd say your a natural
Enter your email address to join: