madosta
ArboristSite Member
- Joined
- Sep 11, 2014
- Messages
- 71
- Reaction score
- 48
I have a MS261 M-Tronic and can't figure out the noise it makes when loaded up in a cut sometimes. It sounds "chattery" - I don't know how to describe it but it's not a pleasant sound - sort of a click/ratchety chatter.
Just pulled the sprocket and the bearing is great, still has grease from the last time I greased it, crank is fine, no discoloration, no markings, no broken clutch springs, and it oils fine.
Happens with .325 and 3/8 sprockets.
Should I pull the clutch or what to try next?
Just pulled the sprocket and the bearing is great, still has grease from the last time I greased it, crank is fine, no discoloration, no markings, no broken clutch springs, and it oils fine.
Happens with .325 and 3/8 sprockets.
Should I pull the clutch or what to try next?