fl cracker
Addicted to ArboristSite
- Joined
- May 29, 2016
- Messages
- 1,615
- Reaction score
- 1,092
I aquired this saw with a broken crank. I got a used oem crank. Split case and replaced crank new seals new bearings new fuel filter new rings new impulse line new clutch springs. Rebuilt carb new starter pawls new spark plug new chain catcher new chain catcher av plug new bar oil plate new fuel cap saw has been press and vacum tested oils runs and idles as it should,400 and split shipping to lower 48 ff or add 3 percent all parts are oem still parts except bar oil plate