Henry-krinkle
ArboristSite Member
- Joined
- Dec 6, 2013
- Messages
- 79
- Reaction score
- 11
Hey guys I have a problem with my oil pump I think. I recently rebuilt a 361 and without the guidance here would never happen. The saw went together perfectly, the saw absolutely rips. After running it with a bar and oil, it seems no oil is getting to the bar at all. Seems like the gets to the pump and then it ends up all in the clutch side. I figured that the oil pump might be loose so I open the clutch side up and everything looks like it's seated properly. Do you guys think the pump is shot or the weep hole clogged?
Here's photo of the saw
Here's photo of the saw