need info on mono h81 chainsaw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

peter92

Addicted to ArboristSite
Joined
Jun 17, 2012
Messages
2,267
Reaction score
1,877
Location
queensland australia
hi guy,s
ive got a mono h81 chainsaw and any info on this saw would be great, at the moment i need to get spark as it doesnt have any, i need a condensor for it, so ive read on the site
i cant remember how to set the timing on it as ive taken the coil out to clean it
so if any one can help on how to set the timing it would be really good
also would it be possible to buy a carby kit for it, if so ,could some one give me the info on that also
lastly is the pull starter
it is missing, i only have the shroul and the whole pull starter is missing
hope you all can help me out as ive done three saws so far and cant wait to fire this baby up
regards peter
 
tecumteh
model h81
serial no 3877671
i forgot to put the other info in
i did find out from here that it is a mono
regards peter
 
thanks very much for the info and the links
have sent mike an email so hopefully he can help me out
im only new here but i already like it , very helpfull mob
regards peter
 
hi all, will try in the next few days to put up some pics of my saw
having power company on the saw, and h81 on it, could it be any other saw apart from a mono
your input on this would be great
if any one has one of these saws it would be great to here your thoughts and any tips on how to start it and use it, but not often, dont want to wreck it
regards peter
 
Rewind starter look like this?

This one is missing the engagement dog and retainer plate.

attachment.php


Power Products and then Tecumseh used it for many years.
 
hi, thanks for putting up the pic
i have the cover but the part that is missing is the pull starter that bolts on to the cover
you wouldnt be interested in selling it would you, if not, do you know how has one they will sell
regards peter
 
hi, thanks for putting up the pic
i have the cover but the part that is missing is the pull starter that bolts on to the cover
you wouldnt be interested in selling it would you, if not, do you know how has one they will sell
regards peter
also when looking down on the cover where the pull starter bolts on, there are 8 holes where the pull starter bolts
on the id plate it says
ser 3877671
grafton, wis, usa
model no H81
when reading the id plate , on the right of the plate is the kill switch
my saw is white with yellow fuel tank
regards peter
 
hi, thanks for putting up the pic
i have the cover but the part that is missing is the pull starter that bolts on to the cover
you wouldnt be interested in selling it would you, if not, do you know how has one they will sell
regards peter

All I have is leftovers you see on the right half of the picture. I bought a complete rewind off evilbay to get the needed parts. Plus, the postage would be killer.

Post up here: http://www.arboristsite.com/stickies/175005.htm and see if one of your neighbors can help.

You are welcome to what I have for free. (I hate to throw out 'stuff'.)

Mono saws were built just south of here in Springfield, Missouri.
 
All I have is leftovers you see on the right half of the picture. I bought a complete rewind off evilbay to get the needed parts. Plus, the postage would be killer.

Post up here: http://www.arboristsite.com/stickies/175005.htm and see if one of your neighbors can help.

You are welcome to what I have for free. (I hate to throw out 'stuff'.)

Mono saws were built just south of here in Springfield, Missouri.
you have pm
regards peter
 
MY MOBILCO BIG 10-130cc

thanks for that link, very helpful and the manual was great
all i need now is some parts
regards peter
i will put some pics up in the morning of my new toy
could you tell me how to put up photo,s please
regards peter
 
Last edited:
The AH81 starter looks like this.
I might have one but don't know where it is right now.

attachment.php


attachment.php
 
The AH81 starter looks like this.
I might have one but don't know where it is right now.

attachment.php


attachment.php

hi all, just took some pics of mine and while i was looking found this number
T-40071A this is on a plate obove the carby
hopefully this will help id my saw
could some one tell me how to link photo,s please
regards peter
 

Latest posts

Back
Top