freekeydiver
New Member
I ran a few tanks of gas and did some easy limbing. Then I slightly opened the muffler exhaust. I removed limiter caps and attempted to tune carb. I set low screw at mid point where if revved the most, then set idle where chain just stopped moving. It will start and idle but bogs down/dies if I give if throttle. I’ve messed w/high screw in and out to no avail. It wont rev and dies.
Any advice?I’m pretty resigned to taking tk a shop although there’s no Echo dealer nearby. Purchased online.
Any advice?I’m pretty resigned to taking tk a shop although there’s no Echo dealer nearby. Purchased online.