Ah ha.
Any idea what model year this happened? I know the strongest saw I used was older, around 07 build
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
Any idea what model year this happened? I know the strongest saw I used was older, around 07 build
I think my stratos Wild Thing is an 06.
Steve
Steve
Hmm, then the 07 definitely should be as well.
Look for the 2 barrel. [emoji16]
Steve
Steve
Picked up a craftsman 3.7 ,358.354831 (poulan 3700) with a busted rear handle half. Went and bought the handle half and now, after 5-6 months im finally starting the repairs. Noticed in the craftsman ipl (also poulan 4000 but not 3400) that theres sposed to be a trigger spring (poulan and cman part number - 25469) that i dont have. Also the trigger for the cman and the 4000 have same part number (26013) whereas the number for the 3400 is different (24249). All the pix look the same. Whew!
1. Do i really need a trigger spring? Wont the carb spring operate the trigger?
2. If i do need one does anyone know where i can get one?
This saw is prime candidate for fixing and flipping. Id hate to waste time on something as minor as looking for a spring the size of my little finger tip
1. Do i really need a trigger spring? Wont the carb spring operate the trigger?
2. If i do need one does anyone know where i can get one?
This saw is prime candidate for fixing and flipping. Id hate to waste time on something as minor as looking for a spring the size of my little finger tip
Thanks
You have a shoulder screw for the rear handle isolator? #15462
Bobby Kirbos
Scrounger of Cellulose Based BTUs
My B-i-L has a Craftsman 358.360260. Any idea what Poulan saw this is?
36 cc 16" bar, that's what Google said
Bobby Kirbos
Scrounger of Cellulose Based BTUs
Yeah, that's what the sticker on the side of the saw says, but if you look at the EPA sticker it's a 42 cc engine. I'm trying to figure out what its Poulan model number is.
Ok, smarter people than me will have to figure that out ,and I'm sure they will.
Take the muffler off and measure the cylinder diameter if you are needing the displacement .
358.360260
WAG cylinder and piston shows fitting 1950 1975 2050 2150 222 2375 etc etc etc etc etc etc etc etc
stubnail67
Addicted to ArboristSite
only numbers i could get ...will this go on a small poulan?
stubnail67
Addicted to ArboristSite
only numbers they gave me is what i meant...it looks like it will work ...only one way to find out...
redunshee
Addicted to ArboristSite
you wouldn't believe how many springs I installed before realizing they weren't needed.
Basically same class of saws. 57cc / 60cc / 54cc-60cc
Buyer trying to make decisions on 1 or 2 or who knows all 3.
Buyer trying to make decisions on 1 or 2 or who knows all 3.
redunshee
Addicted to ArboristSite
Again, I’m jealous. Who makes the Cub Cadet.? I know some older ones were Echos.
Yellow CC is a efco 156
Similar threads
